Colnago Y1RS Computer Mount 13.6 g Lightweight / 19.6 g 1050 Edition

The TiNE titanium computer mount for the Colnago Y1RS integrated handlebar — a topology-optimized 3D-printed mount that replaces the stock plastic mount on Colnago's flagship aero bar — comes in two versions: the Ultra-Light edition at 13.6 g (optimized for standard Garmin/Wahoo units) and the 1050 Heavy-Duty edition at 19.6 g (designed for large-format computers like the Garmin Edge 1050).

13.6 g for the lightweight version, 19.6 g for the 1050 version. Both mounts are topology-optimized 3D-printed titanium — every strut and surface is algorithmically shaped for maximum stiffness at minimum weight. The 5.9 g difference between versions comes from additional reinforcement ribs that support the larger screen area of the Edge 1050 and similar oversized computers.

What Makes the Colnago Y1RS Mount Different

The Colnago Y1RS is one of the most aerodynamically integrated handlebars in road cycling — the stem, bar, and computer mount interface are designed as a unified aerodynamic system. The stock plastic computer mount is functional but heavy, and its generic shape does not match the Y1RS's aerodynamic philosophy.

TiNE's titanium mount is topology-optimized specifically for the Y1RS clamp interface. The 3D-printed titanium structure uses algorithmically generated internal ribs and surface curves that follow the Y1RS's aerodynamic lines while providing a stiffer mounting platform than plastic. The result: a computer mount that looks like it belongs on the Y1RS, weighs 13.6 g in the lightweight version, and holds your Garmin or Wahoo securely at speed.

Two Editions — Which One for Your Y1RS

Ultra-Light (13.6 g) — For riders using standard-size computers (Garmin Edge 840/540, Wahoo Bolt v2, Karoo 3, and similar). The topology-optimized structure is stiff enough for these units with no perceptible flex at riding speed. This is the version for most Y1RS riders who prioritize weight.

1050 Heavy-Duty (19.6 g) — For riders using large-format computers (Garmin Edge 1050, Hammerhead Karoo 2 with large mount, or any computer with a screen over roughly 3.5 inches diagonal). The additional 6 g comes from reinforcement ribs across the mount platform — these ribs prevent screen wobble and vibration on large units that extend beyond the standard mount footprint.

Both editions use the same Y1RS clamp interface and detachable Go-Pro-compatible lower mount (3.8 g separately). The titanium construction means both versions resist corrosion, maintain structural stiffness over years of use, and can be anodized in 8 colors to match your Y1RS aesthetic.