Colnago CC01 Titanium Computer Mount Weight: 11.6 g Ultralight vs Y1RS

The Colnago CC01 is a cockpit built around integration — the stock computer mount sits flush with the bar, but it is also one of the heaviest plastic pieces on the front end. Swapping it for a titanium mount is a straightforward way to drop weight and add color coordination that the OEM part cannot match.

Why the CC01 Mount Matters

The CC01 one-piece handlebar wraps the stem, bar, and mount into a single silhouette. That means the computer mount is not an accessory you can reposition — it is a structural element of the cockpit. The TiNE titanium mount for the CC01 is machined to the exact interface, so the fit is identical to stock, but the material is Grade 5 Ti-6Al-4V — roughly half the density of the original plastic.

Weight Comparison

The 7.0 g gap between the two versions comes from the reinforced faceplate required for the Garmin Edge 1050. The arm geometry, clamp interface, and under-mount are identical — only the top platform changes.

CC01 vs Other Colnago Mounts

The CC01 mount is 2.0 g lighter than the Y1RS ultralight — the CC01 bar has a narrower aero profile, so the mount arms can be shorter. Both share the same material (CNC + topology-optimized 3D-printed Grade 5 Ti-6Al-4V) and the same detachable under-mount for GoPro or light.

Material and Color

Grade 5 Ti-6Al-4V with CNC machining and topology-optimized 3D printing. Eight anodized color options: Gold, Blue, Candy, Silver, Black, Pink, Green, Rainbow. Each mount ships with titanium bolts — no mixed-material hardware.

Compatibility

This mount is designed specifically for the Colnago CC01 one-piece handlebar. It is not interchangeable with the Y1RS bar or any other Colnago cockpit. The under-mount (3.8 g) supports GoPro or a riding light — one device at a time.