Nachrichten

Colnago Y1RS titanium expander bolt kit sizing guide: how to select the right shaft by frame size and handlebar screws by spacer height. 49.1 g vs 98.5 g stock, saving 49.4 g. Shaft adds 0.4 g per size step (Ti) vs 0.9 g (steel) — savings grow with frame size. CNC Grade 5 Ti-6Al-4V, 8 anodized colors.

TiNE Colnago Y1RS titanium expander kit selection and installation guide: shaft sizing per frame size (XS baseline, +0.4 g Ti per step), handlebar screw selection per spacer count (0-5 spacers, 6 M6 configs), 9-step assembly sequence from expander core to surface bolts. Shaft must be installed before surface bolts. Kit stacks with Y1RS computer mount and balance weight set. 49.4 g saved (XS + 0 spacers baseline). CNC Grade 5 Ti-6Al-4V, 13-piece, 8 colors.

TiNE titanium bar end plugs weigh 3 g per pair (versus ~5 g stock), saving ~2 g with a topology-optimized six-point star pattern. Step-by-step installation guide: remove old plugs, clean bar ends, orient, tap into place, verify fit. Fits 19 mm ID road bars. Grade 5 Ti-6Al-4V, 8 anodized colors.

A breakdown of every frame bolt on the Specialized Tarmac SL9: seatpost clamp (M4), front derailleur hanger (M4×2), bottle cages (M5×4), headset cap (M3). Stock steel total 19.7g. Titanium replacements drop it to 8.3g, saving 11.4g. Covers frame vs groupset bolt differences, galvanic corrosion advantages of titanium in carbon frames, and install tips.

CeramicSpeed OSPW cage screw upgrade: TiNE titanium 4-piece set. Old cage version weighs 1.9g vs stock 3.6g (saves roughly 1.7g), new cage version weighs 2.4g vs stock 5.2g (saves roughly 2.8g). Critical torque sequence: 1Nm → 0.3Nm → 1Nm → 0.3Nm top to bottom (alternating pattern balances cage plate tension). Grade 5 Ti-6Al-4V, CNC, 8 anodized colors. Rider story: Mark's cage alignment fix.

Centerlock-to-six-bolt adapter converts six-bolt rotors to centerlock hubs. TiNE titanium lock rings: outer 5.5g (for six-bolt conversion), inner 4.6g (for direct centerlock), roughly half the weight of steel (~10-12g). Step-by-step install guide covering hub identification, lock ring selection, and spline thread care.

Titanium water bottle cage bolts upgrade starts with the four fasteners that hold your cage. TiNE M5×10 (0.7g) and M5×14 (0.8g) resist seizing far better than steel, saving roughly 2g per set. Grade 5 Ti-6Al-4V, 8 anodized colors, CNC machined. FAQ covers grip, sizing, and install.

Side-by-side comparison of Center Lock and 6-bolt disc brake systems. TiNE titanium hardware saves weight for both: lock ring 5.5g, inner cap 4.6g, caliper mount 5.9g.

Schritt-für-Schritt-Anleitung: Ermitteln Sie den Typ Ihrer Binder Bolt, überprüfen und warten Sie sie, rüsten Sie auf TiNE Titan auf für 12,4 g Gewichtsersparnis und null Korrosion.